Seal King
Installation Guide
Hard-Co carries sealer by Seal King, stocking both Water Based and Oil Based sealer available in a variety of finishes including High Gloss, Semi Gloss and Natural Look.
Paving Stone Sealer
Solvent Bourne Features
- Protects against oil, dirt and salt
- Enhances colour of stone
- V.O.C. Compliant
- Makes cleaning easy
- Touch dry in 30 minutes
- Can be driven on in 4 hours
- Lasts up to 3 years
Coverage: Approx. 150 sq.ft. / one (1) gallon
Water Bourne Features
- Protects against oil, dirt, salt, anti-freeze,
and transmission fluid
- Leaves a wet look
- Low odor
- For indoor or outdoor use
- Touch dry in 8 hours
-
Can be driven on in 24 hours
Coverage: Approx. 200 sq.ft. / one (1) gallon
Natural Stone Sealers
Solvent Bourne Features
- Protects against stains, dust, acid rain, mildew, fungus, UV rays, salt, oils, efflorescence and freeze/thaw cycles
- For most natural stone including: limestone, slate, marble, granite, quarry tile and others
- Reduces chipping, crumbling and cracking
- Allows moisture vapor transmission
- For Outdoor use only
- V.O.C. Compliant
Coverage:
Natural Look – 400 to 2000 sq.ft. / 1gal.
Colour Enhancer – 250 to 2000 sq.ft. / 1gal.
Natural Look – 400 to 2000 sq.ft. / 1gal.
Colour Enhancer – 250 to 2000 sq.ft. / 1gal.
TOOLS AND SUPPLIES > SEAL KING
Seal-Grip
Seal King Seal-Grip is specially manufactured to create a textured surface without the sharp edges. Seal-Grip bonds easily to the acrylic sealer for a strong, durable, long lasting finish.
Special Features:
Use with Seal King’s; Paving Stone sealer, Cure and Seal, Impressed Concrete sealer, and Epoxy 100% Solids.
For driveways, patios, garages and steps.
Increases traction.
Rounds edges for barefoot walking
Stronger than sand.
Easy to use.
Good for Solvent and Water bourne sealer.
For driveways, patios, garages and steps.
Increases traction.
Rounds edges for barefoot walking
Stronger than sand.
Easy to use.
Good for Solvent and Water bourne sealer.
Coverage: Simply add 1Lbs. of SEAL-GRIP to Seal King’s 18.9 L (5 gallon) Sealer.
For one (1) gallon use 1/4 Lbs. of SEAL-GRIP.
For one (1) gallon use 1/4 Lbs. of SEAL-GRIP.
Cleaners
Oil Off
- Removes oil and grease from paving stone, concrete and asphalt as well as garages, engines, tires and rims
- Environmentally friendly and biodegradable
- Easy to use
- Pleasant odor
Grease Release
- For paving stones and concrete
- Removes oil, tar, grease, adhesives, latex paint and driveway sealer
- Water-soluble
- After use simply rinse away
- Available in 1L / 32oz. containers
Rust Remover
- For paving stones and concrete
- Removes stubborn rust stains
- Easy to use
- Available in 1L / 32oz. containers
Efflorescence Cleaner
- Formulated to dissolve efflorescence (whitish salt)
- Removes ground in dirt
- Brightens up the colour of the pavement stone
- Does not contain muriatic acid
- Available in 2L / 64oz. containers
Coverage:
- Approx. 800 sq.ft. / 2L 64oz.
Strip-All
- Available in both Solvent and Water bourne
- Easy to use.
- No strong odor. (Water Bourne only)
- Helps remove old or tainted sealer from surface.
- Fast dissolving properties.
- Just apply, wait and remove.
- Available in 3.79L (1 Gal.) and 18.9L (5 Gal.)
Coverage:
1 Gallon = 100 Square Feet
PLEASE NOTE:
Seal King recommends using a professional installer. Make sure that when using an installer, they have multiple years of experience or legitimate references.
For MSDS and Technical data sheets please go to the Seal King Website:
www.sealking.ca